Mini excavator model file · See source/variant scope
Dealer-hosted older OEM manual printed page 6. Later XN08 variants may differ.
At a glance
Changchai diesel in this manual edition
Confirm the machine plate, market, build year and fitted engine before using a parts or service reference.
Identity & equivalents
Relationship labels keep confirmed rebadges separate from shared components and lookalike search leads. Verify the model plate, market and serial before ordering parts.
No source-backed direct model relationship is recorded yet.
Older XN08 manual differs in track width/length, machine width and engine. Shared size class does not prove common parts.
Evidence scope: candidate search family
Whole-machine interchangeability is not established.
Source notes:UHI UME10T product and specifications UHI Machinery AU · checked 2026-10-10XN08 Operation & Maintenance Manual Shandong Rhinoceros Engineering Machinery Co., Ltd.; hosted by Excavatar · checked 2026-10-10
A research collection, not a declaration that all models are identical.
Documents
Manual coverage, edition and scope are catalogued here. This wiki does not send you away to open third-party product manuals; original files are not hosted unless a local copy is explicitly identified.
Source record; no external document link
pdf · 52 pages
52 pages; older Changchai configuration, with BOM appendix. Numbered entries such as 1.4 or 2.23 are drawing locators, not verified manufacturer ordering codes. No dimensions or serial applicability provided for those entries.
Source notes:XN08 Operation & Maintenance Manual Shandong Rhinoceros Engineering Machinery Co., Ltd.; hosted by Excavatar · checked 2026-10-10
Source record; no external document link
Factory technical support route; request serial-specific illustrated parts catalogue and manual revision. No enquiry sent.
Source notes:Customer Support & Technical Service Shandong Kenstone Heavy Machinery · checked 2026-10-10
Source record; no external document link
html_with_illustrated_guide
Dealer's explicitly named XN08/XN10-8 guide. Exact engine/fuel-system configuration and manufacturer procedure must be checked; no UHI or Crytec applicability established. No procedures reproduced.
Source notes:XN08 / XN10-8 fuel-system priming — illustrated dealer guide WSPoweronline · checked 2026-10-10
Source record; no external document link
This is a supplier brand/tonnage lead, not exact model fit. Read the cylinder stamp: seller requires WKS02. Other ram models may not suit; no seal-kit ordering code published and item was sold out when checked.
Source notes:Rhinoceros / Raptor 25mm Pin Stick Hydraulic Cylinder Seal Kit Digzilla Machinery · checked 2026-10-10
Source record; no external document link
180×72×37K, seller SKU ERT031872037K, roller type A2. Exact list uses unsuffixed XN08/XN10/XN12. Keep profile and suffix; no automatic UHI or XN10-8 fit.
Source notes:Rubber Track 180x72x37K — SKU ERT031872037K Lucas Parts · checked 2026-10-10
Source record; no external document link
HTML
2026 official statement names Shandong Kenstone Heavy Machinery as Rhinoceros/Xiniu brand owner; support page routes owners to authorized regional providers for OEM parts and service. Does not collapse XN/KS/MY models into one fitment family.
Source notes:Rhinoceros / Xiniu official manufacturer and brand-owner statement, 2026 Shandong Kenstone Heavy Machinery Co., Ltd. · checked 2026-10-11Rhinoceros official technical support and spare-parts route Shandong Kenstone Heavy Machinery Co., Ltd. · checked 2026-10-11
Parts lookup
Part codes below retain the source scope. A component family or seller label is a search lead, not a fitment guarantee.
BU25 02Listed for this model
seller_claim_not_independently_tested
Specific dealer product names XN08; not a universal machine mounting standard or UHI compatibility confirmation.
Source notes:200 mm bucket with 25 mm pins WSPowerOnline · checked 2026-10-10
CH 05Listed for this model
seller_claim_not_independently_tested
Seller also names XN12/XN800; do not substitute XN12-8 from similarity. Original description's 37cm is inconsistent with table 37 links. Confirm exact track profile and serial configuration.
Source notes:Rhinoceros XN08/XN10/XN12/XN800 track set WSPowerOnline · checked 2026-10-10
CT 03Listed for this model
seller_claim_not_independently_tested
Seller identifies M6 swing-boom version; actual linkage/thread must be checked. No UHI fitment or manufacturer ordering code established.
Source notes:M6 swing-boom swivel/control linkage set WSPowerOnline · checked 2026-10-10
180x72x37Listed for this model
Source-listed item; confirm exact variant before ordering
Dealer exact-model fit list; JLL or Yachoo brand. Verify width, pitch, link count and guide/drive geometry.
Seller model labels: Rhinoceros XN08SE, Rhinoceros XN10S, Rhinoceros XN10SE, Rhinoceros XN12, Rhinoceros XN12SE, Rhinoceros MY10-8, Rhinoceros XN10-9, Rhinoceros XN12-9, Raptor RE10-8, Raptor RE10-9B, Raptor RE10-9, Raptor RE12-9. Those labels do not confirm fit.
Source notes:Digzilla Machinery — seller explicit component compatibility Digzilla Machinery · checked 2026-10-10
38.5mm overall / 30mm eye-to-end / 6mm screw / 29.4mm short screwBrand lead; exact model fit not verified
Source-listed item; confirm exact variant before ordering
Seller lists Rhinoceros, Raptor, Digger King and UHI 0.8/1.0/1.2 models without exact codes or serials. Short/long screw versions differ.
Source notes:Digzilla Machinery — seller brand level component compatibility Digzilla Machinery · checked 2026-10-10
HPT 22Listed for this model
supplier_explicit_model_listing_dimensions_illustrated_unfitted
Supplier-published image measurements, not measurements of the reference machine. Exact XN08 seller listing only. Match full pump code, rotation, displacement, ports, shaft/spline and mounting geometry; no XN10-8, UHI or other pump fit inferred.
Source notes:WSPower XN08 hydraulic pump — HPT 22 and dimension illustration WSPoweronline · checked 2026-10-10
HPT 19Listed for this model
supplier_component_cross_listing_not_independently_tested
Two suppliers publish the same motor designation and 70 mm mounting centres, with separately attributed fit lists. Other interface dimensions and operating ratings still require matching. HPT 19 is only WSPower's seller code. Similar ZMP-1-250-6 and BM1-200 names have not been equated. No UHI, Crytec or XN10-8 fit claim is established.
Seller model labels: Rhinoceros XN12 (no suffix), Everun ERE10, Raptor RE10-8, Raptor RE10-9B, Raptor RE10-9. Those labels do not confirm fit.
Source notes:XN08 / XN12 / Everun ERE10 turning motor — seller SKU HPT 19 WSPoweronline · checked 2026-10-10Rhinoceros / Raptor swing motor ZHP-1-250-6 Digzilla Machinery · checked 2026-10-10
CT 02Listed for this model
seller_claim_not_independently_tested
Supplier names two exact Rhinoceros models. Other brands are brand-level search leads with no exact model fit established. Confirm cable length, ends and fitted control layout.
Seller model labels: Rhinoceros XN12 (title only, no suffix). Those labels do not confirm fit.
Source notes:XN08 / XN10-8 throttle cable — seller SKU CT 02 WSPoweronline · checked 2026-10-10
HPT 18seller_claim_not_independently_tested
Seller lists XN08/XN10-8/XN12 but does not identify the fitted motor or seals. Verify motor nameplate and seal dimensions before matching; this is not proof that whole motors or machines are interchangeable.
XN08 / XN10-8 / XN12 track-motor seal kit — seller SKU HPT 18 WSPoweronline · checked 2026-10-10CT 04seller_claim_not_independently_tested
Seller separately lists M6 swing-boom set CT 03 and M8 non-swing set CT 04. Model-name overlap does not make the two sets interchangeable; confirm the fitted linkage, thread and dimensions. No UHI or Crytec compatibility established.
M8 non-swing control linkage set — seller SKU CT 04 WSPoweronline · checked 2026-10-10M6 swing-boom control linkage — seller SKU CT 03 WSPoweronline · checked 2026-10-10seller_claim_not_independently_tested
Exact supplier model labels only. Thread alone does not establish sealing interface, bore, pressure rating, routing or crimp construction. Measure the original assembly and obtain hydraulic-hose supplier confirmation.
100 cm boom / tilt-bucket hose Mini Digger Parts Supermarket · checked 2026-10-10Seller-listed component condition; confirm WKS02 marking and exact cylinder before ordering.
Brand/tonnage claim only: Rhinoceros, Raptor, Digger King and UHI 0.8/1.0/1.2 classes. The seller requires WKS02 stamped on the actual stick ram; WKS02 is a required cylinder marking, not a published seal-kit ordering number. Other cylinders may not fit. Listing was sold out when checked.
Rhinoceros / Raptor 25mm Pin Stick Hydraulic Cylinder Seal Kit Digzilla Machinery · checked 2026-10-10ERT031872037KExplicit aftermarket-seller model fit list; no independent installation test.
Lucas Parts seller fit list names unsuffixed Rhinoceros XN08/XN10/XN12 and the retained additional model labels. Match K size suffix, A2 roller/guide profile, track stamping and sprocket/guide geometry. Do not inherit to XN10-8, XN12-8, UHI, Crytec or Kingway without unit-specific confirmation.
Rubber Track 180x72x37K — SKU ERT031872037K Lucas Parts · checked 2026-10-10Published roller-profile diagram A1/A2/B1/B2/C1/C2 Lucas Parts · checked 2026-10-10Conditional seller claim; match actual cylinder marking before ordering.
Seller brand/tonnage claim only, covering Rhinoceros/Raptor/Digger King/UHI 0.8/1.0/1.2 classes. Requires WKS01 on the boom ram itself; this is the cylinder marking, not a seal-kit part number. Other cylinders may not suit. Sold out when checked.
boom cylinder seal kit — requires WKS01 marking Digzilla Machinery · checked 2026-10-10Conditional seller claim; match actual cylinder marking before ordering.
Seller brand/tonnage claim only, covering Rhinoceros/Raptor/Digger King/UHI 0.8/1.0/1.2 classes. Requires WKS03 on the bucket ram itself; this is the cylinder marking, not a seal-kit part number. Other cylinders may not suit. Sold out when checked.
bucket cylinder seal kit — requires WKS03 marking Digzilla Machinery · checked 2026-10-10Conditional seller lead; exact UME10T fit unverified.
Conditional brand/tonnage lead: supplier says should suit these brands in 0.8/1.0/1.2/1.5T classes. Poppet couplers explicitly do not mate with flat-faced couplers. No exact UME10T, ISO coupling series, pressure rating or seal-seat specification; match installed ports, mating coupler series and system rating before choosing an adapter variant.
3/8-inch hydraulic quick-coupler pairs with G3/8 or M18 × 1.5 adapters Digzilla Machinery · checked 2026-10-10Workshop help
These are source-indexed topics and locators, not a complete workshop procedure. Confirm the manual edition and configuration before service.
PDF page 22 · printed page 22
52 pages; older Changchai configuration, with BOM appendix. Numbered entries such as 1.4 or 2.23 are drawing locators, not verified manufacturer ordering codes. No dimensions or serial applicability provided for those entries.
Source notes:XN08 Operation & Maintenance Manual Shandong Rhinoceros Engineering Machinery Co., Ltd.; hosted by Excavatar · checked 2026-10-10
PDF page 39 · printed page 39
52 pages; older Changchai configuration, with BOM appendix. Numbered entries such as 1.4 or 2.23 are drawing locators, not verified manufacturer ordering codes. No dimensions or serial applicability provided for those entries.
Source notes:XN08 Operation & Maintenance Manual Shandong Rhinoceros Engineering Machinery Co., Ltd.; hosted by Excavatar · checked 2026-10-10
PDF page 48 · printed page 48
52 pages; older Changchai configuration, with BOM appendix. Numbered entries such as 1.4 or 2.23 are drawing locators, not verified manufacturer ordering codes. No dimensions or serial applicability provided for those entries.
Source notes:XN08 Operation & Maintenance Manual Shandong Rhinoceros Engineering Machinery Co., Ltd.; hosted by Excavatar · checked 2026-10-10
PDF page 49 · printed page 49
52 pages; older Changchai configuration, with BOM appendix. Numbered entries such as 1.4 or 2.23 are drawing locators, not verified manufacturer ordering codes. No dimensions or serial applicability provided for those entries.
Source notes:XN08 Operation & Maintenance Manual Shandong Rhinoceros Engineering Machinery Co., Ltd.; hosted by Excavatar · checked 2026-10-10
PDF page 50 · printed page 50
52 pages; older Changchai configuration, with BOM appendix. Numbered entries such as 1.4 or 2.23 are drawing locators, not verified manufacturer ordering codes. No dimensions or serial applicability provided for those entries.
Source notes:XN08 Operation & Maintenance Manual Shandong Rhinoceros Engineering Machinery Co., Ltd.; hosted by Excavatar · checked 2026-10-10
PDF page 52 · printed page 52
52 pages; older Changchai configuration, with BOM appendix. Numbered entries such as 1.4 or 2.23 are drawing locators, not verified manufacturer ordering codes. No dimensions or serial applicability provided for those entries.
Source notes:XN08 Operation & Maintenance Manual Shandong Rhinoceros Engineering Machinery Co., Ltd.; hosted by Excavatar · checked 2026-10-10
PDF page 22–27 · printed page 22–27 · Maintenance table; technical maintenance; grease; engine oil; hydraulic system
Older 52-page XN08 manual explicitly describes a Changchai-equipped XN08. Applicability to later engines, configurations and serial ranges is unconfirmed.
Manual sections provide daily inspections, periodic maintenance/overhaul table, grease and fluid servicing, troubleshooting and a track-deflection/tensioner item. Table markers distinguish normal, first-inspection and fluid-dependent intervals; verify the complete matching manual instead of transferring intervals to other XN08 builds.
Source notes:XN08 Operation & Maintenance Manual Shandong Rhinoceros Engineering Machinery Co., Ltd.; hosted by Excavatar · checked 2026-10-10
Source names, publishers, editions and check dates stay on the page so you can judge the evidence without jumping between product sites. A relationship is only treated as a rebadge when the underlying sources explicitly support that scope.